ALFANO LAMBDA KIT - CONTROLER+SENSOR+RING+NUT

Alfano Lambda Kit – Complete AFR Monitoring Solution

Precision tuning starts here. The Alfano Lambda Kit is designed for racers who demand accurate air/fuel ratio data to optimize engine performance. Compatible with the Alfano 7 system, this kit provides real-time feedback to help you fine-tune carburetion and maximize power output.

Kit Includes:

• Lambda Controller – Interfaces with Alfano 7 via the black BUS port or Box12
• Bosch LSU 4.9 Sensor – Industry-standard wideband probe for reliable AFR readings
• Weld-In Ring & Nut – Stainless steel components for secure exhaust mounting

A2502-PACK Wide Band Lambda Sensor LSU 4.9 + Controller Lambda Sensor LSU 4.9 - Direct Connection ALFANO7 or BOX12 connected to the ALFANO7 + Ring/Nut to install Lambda Sensor

Key Features:

• Real-Time AFR Monitoring – Helps identify lean/rich conditions for optimal tuning
• Plug-and-Play Compatibility – Designed for Alfano 7 and Box12 setups
• Durable Construction – Built to withstand high heat and vibration
• Tuning Light Mode – Visual feedback for quick adjustments

Compatibility:

• Works with Alfano 7 and Box12 connected to Alfano 7
• Not compatible with Alfano 6 or Box12 used with Alfano 6

Installation:

The temperature sensor (LAMBDA) must be positioned in the output of the engine exhaust gas, at an approximate distance: 100-150mm (3.93/5.9inch)

1) Drill a hole with a diameter of 18mm (0.70inch).
2) Solder the nut provided
3) Fix the sensor with a 22mm spanner (do not tighten too hard)

WARNING: During installation, take care to remove the wire of this sensor from the other cables, mainly of the type: RPM, high tension ignition system, in order to avoid mutual interference.